The KICKER® KMF 12-inch Marine Subwoofer makes serious bass - no enclosure necessary! Made to take the power and the weather, this sub is custom made to bang in your boat.

 

 

SHOCK WAVES

 

Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.

 

FEATURES

 

• Four-Ohm Voice Coil
• Injection-Molded Polypropylene Cone
• Co-molded Santoprene® Surround
• UniPlate™ Back Plate And Pole Piece
• Thick Tinsel Leads
• Large Ceramic Magnet
• Rear Gasketing Included
• Polymer Basket Resists Corrosion
• Protective Terminal Cap
• Stainless Mounting Hardware Included
• Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure

(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)

 

*The KMF 12-inch Subwoofer works best with 175 watts of recommended power. See below for more details.

 

Specifications

 

Woofer: 12in, 305mm

Impedance (OHMS): 4 SVC

Peak Power Handling(Watts): 350

Continuous Power Handling(Watts RMS): 175

Sealed Enclosure Volume Min-Max(ft³, L): N/A

Vented Enclosure Volume Min-Max(ft³, L): N/A

Frequency Response(Hz): 30-500

Mounting Depth(in, cm): 5.5, 13.9

Hole Diameter(in, cm): 11, 27.9

Outer Diameter(in, cm): 13, 32.95

 

What's in the Box:

 

1 - 12" Woofer

1 - Back gasket

8 - Mounting screws

8 - Mounting screw clips

1 - Manual

 

*Assumes typical music program with minimal amplifier clipping; varies with enclosure size.

**Port Volume Excluded.

 

Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.

 

 

 

 

• 2018_KM_Sub.pdf