AMPLIFIER JL AUDIO M 1000W / 5 CHANNEL / V2 SPEC

AMPLIFIER JL AUDIO M 1000W / 5 CHANNEL / V2 SPEC

Code: M89-45-0062
Price: €1,282.40
Availability: Low availability
Prices include VAT

M1000/5v2

 

5-Channel Class D Marine System Amplifier, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4V

 

Here is the perfect, all-in-one solution to drive a potent 4-speaker + dual subwoofer marine audio system. The M1000/5v2 delivers up to 1000 W of clean power and can comfortably drive two pairs of quality component speaker systems with 75 W x 4 @ 4 Ω, while also delivering a stout 600 W of power to a dual subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching amplifier design.

 

The M1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.

 

With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels.

 

This amplifier features white and gray powder-coat finish, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

 

v2 Specification

 

An enhanced set of features added to XD and M-Series amplifiers that bear the "v2" designation make these models more versatile than ever.

 

Automatic Turn-On - Automatic turn-on detects a signal from virtually any audio source to turn on the amplifier. This feature gives the user greater flexibility in installations where the amplifier may be connected directly to a digital media players such as an iPhone or iPod. The amplifier will also turn on via the traditional remote turn-on lead from a switched +12 V power source from your head unit. Audio signal sensing from the amplifier's inputs or electrical signal sensing from the amplifier's remote lead... Automatic turn-on means you only have to concern yourself with hitting "play".

Dual-Range Differential Balanced Input Section - The realities of today's installations mean the input section of the amplifier could be connected to a variety of audio sources, which is precisely why the input section of the v2 Spec amplifiers has been intelligently designed to give the user maxium flexibilty. Whether your installation needs require connecting higher powered Speaker-Level Inputs or lower powered Line-Level Inputs, the amplifier will permit either and ensure the high fidelity amplifier output you've come to expect from JL Audio without the need for messy line-output converters and other devices.

Rated Continuous (RMS) Power @ 14.4 V

Main Channels @ 4 Ω

75 W RMS x 4

Main Channels @ 2 Ω

100 W RMS x 4

Main Channels - Bridged @ 4Ω

200 W RMS x 2

Subwoofer Channel @ 4 Ω

400 W RMS x 1

Subwoofer Channel @ 3 Ω

500 W RMS x 1

Subwoofer Channel @ 2 Ω

600 W RMS x 1

Subwoofer Channel @ 1.5 Ω

N/A

 

 

Rated Continuous (RMS) Power @ 12.5 V

Main Channels @ 4 Ω

60 W RMS x 4

Main Channels @ 2 Ω

90 W RMS x 4

Main Channels - Bridged @ 4Ω

180 W RMS x 2

Subwoofer Channel @ 4 Ω

360 W RMS x 1

Subwoofer Channel @ 3 Ω

480 W RMS x 1

Subwoofer Channel @ 2 Ω

600 W RMS x 1

Subwoofer Channel @ 1.5 Ω

N/A

 

 

General Specifications

Frequency Response (Main Channels)

12 Hz - 22 kHz (+0, -1dB)

Frequency Response (Subwoofer Channel)

10 Hz - 1 kHz (+0, -1dB)

S/N Ratio, referred to highest rated power (Main Channels)

>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W

>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 Ω

>150 / 50 Hz

Damping Factor @ 2 Ω

>75 / 50 Hz

THD+N @ Rated Power (Main Channels)

<1% @ 2 Ω per Ch.

THD+N @ Rated Power (Subwoofer Channels)

<1% @ 2 Ω per Ch.

Input Voltage Range @ RCA Inputs

Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)

Min.Copper Power / Ground Wire Gauge

4 AWG wire

Fuse Rating

80 A (AFS, AGU or MaxiFuse™)

 

Signal Processing

Filter Mode(s): Channels 1 & 2 (front)

High-Pass only

Filter Slope(s): Channels 1 & 2 (front)

12 dB/octave

Filter Frequency Range: Channels 1 & 2 (front)

50 Hz - 5 kHz

Filter Mode(s): Channels 3 & 4 (rear)

High-Pass or Bandpass

Filter Slope(s): Channels 3 & 4 (rear)

12 dB/octave

Filter Frequency Range: Channels 3 & 4

50 Hz - 500 Hz

Filter Mode(s): Subwoofer Channel

Low-Pass only

Filter Slope(s): Subwoofer Channel

12/24 dB/octave

Filter Frequency Range: Subwoofer Channel

50 Hz - 500 Hz

Detented, Calibrated Filter Freq. Potentiometers

Yes

Filter Defeat Function

Yes

Infrasonic Filter: Subwoofer Channel

none

Remote Level Control

Optional (HD-RLC)

Remote Level Modes

Sub Ch. or All Channels

Channel Input Mode Switch

Yes (2/4/6 ch.)

Pass-Through Preamp Output

None

Source Channel Selection for PreOuts

N/A

 

 

 

 

 

 

Physical Specifications

Height (H)

2.05 in / 52 mm

Width (W)

14.73 in / 374 mm

Depth (D)

7.09 in / 180 mm

 

Related products